Most Common Rigging Issues Contractors Must Prevent

December 15, 2021

Cranes are essential in lifting and moving loads from one place to another. Through reliable crane operators, the movement of the cranes is controlled and regulated perfectly.

But one aspect of the crane operations that must be done first is rigging. Rigging, which is often done by professional riggers, is an activity that involves the preparation of the crane and the materials or objects that will be lifted. The process of rigging must be done according to the lifting plan to ensure that the load will be moved safely. Doing this can also ensure that the crane components are protected.

Various rigging equipment pieces are recommended to be picked, checked, and loaded properly to keep the crane operations safe. Any missteps during the rigging process can make the entire crane operations fall apart. Contractors, therefore, should prevent the following common rigging issues from happening.

Exceeding Load Limits

One common rigging issue that contractors should prevent is to exceed the load limits of the rigging equipment. Various rigging equipment pieces can be maximised in conducting the rigging process. Some of them include wire rope slings, chain slings, and spread beams. One thing that they all have is the load limit. Without knowing and respecting the load limit of these things, the entire rigging process might fail, which could eventually lead to accidents on site. To ensure that their load limits are respected, contractors must always calculate and determine the weight of the load.

Skipping Inspections

Another rigging issue that contractors should prevent is skipping inspections. The assessment of rigging equipment pieces and gears must always be conducted before rigging so that contractors will know if they are still in good condition. The inspections must be done regularly, particularly before using the rigging equipment pieces and gears. They must also be done by those who have enough knowledge and skills in identifying issues and problems. Once damages and problems are found on some of these things, workers are expected to perform all necessary actions to avoid causing problems during rigging.

Mismatching Hardware

Mismatching the slings and other hardware involved in the rigging process can also be considered a major problem that contractors should always avoid. Not all loads are made similarly. Hence, they would often require a different set of safety and rigging equipment pieces. Once they are accompanied with incompatible slings and hardware, then the loads might only become unstable during the lifting operations. Worse, they would only lead to costly and even deadly accidents on the project site. Matching the right type of slings, hitch, and other hardware for specific loads must be done to prevent any mishaps.

Disregarding Training

One more thing that should always be prevented by contractors is to disregard any training and preparation. Employees who are involved in conducting the rigging process should undergo crane rigging training regularly so that their skills can improve. They must be able to attach loads properly. They should also respond quickly to any rigging mishaps, preventing any damages or injuries right away.

To find out more about rigging, you can call us at Adz Lift Crane Hire.